Quickvue Covid Test Instructions

Quickvue Covid Test Instructions. This kit describes serial testing as testing each. Rapid results in 10 mins.

QUIDEL QUICKVUE ATHOME OTC COVID19 TEST KIT Practical from www.desertcart.co.zw

The swab is swirled in a tube of reagent solution, then removed, before a test strip is inserted. Dispose swab into the biohazard bag. Both a blue line and a pink.

Rapid Results In 10 Mins.

A positive result must show. Place the test strip into the reagent tube with the arrows pointing down. After completing all steps, wash hands or use hand sanitizer.

The Test Is Intended To Be Used Twice Over Two To Three Days, With At Least 24 Hours And No More Than 36 Hours Between Tests.

If you are going to an indoor event or a gathering, test yourself immediately before or as close to the time of the event as. The swab is swirled in a tube of reagent solution, then removed, before a test strip is inserted. 8prepare test strip by opening the strip pouch at the tear here mark.

Rub The Swab Head Against The Wall Of The Tube To Squeeze Out As Much Liquid As Possible When Extracting The Swab.

Healthcare professionals can purchase the quickvue sars antigen test through select authorized distributors. After ten minutes, you can take the strip out of. Line near the blue line.

See also  Quickvue Covid Test Accuracy Percentage

Both A Blue Line And A Pink.

Even a very faint, pink test line and a blue. This kit describes serial testing as testing each. Before starting read these instructions carefully complete the steps in order

Place The Test Strip Inside The Tube With The Arrows Pointing Down And Leave It Inside The Tube For At Least 10 Minutes.

Two (2) tests with simple instructions. Do not touch the swab head. A second test should be obtained with at least 24 hours (and no more than 36 hours) between tests.

Leave a Reply

Your email address will not be published.